|
8 way stitches Border with Designer SE
We used to be able to bring up the design and touch CLR to save
it and then touch CLR each time we wanted it back again. But, I
don't see how to do that now.
Touch "prog" and access the H menu and touch stitch #5.
Access the T menu and touch the arrow going to the center right 4 times.
Touch the arrow angling up on the top right 4 times.
Access the H menu and choose #5.
Access the T menu and touch that same center right arrow 4 times and the one
on the top angling to the right 4 times.
Access the H menu and choose #5 again.
Access the T menu and this time use the arrow angling to the top left 4 times
and then touch the one going straight to the left 4 times.
Acess the H menu and choose #5 again.
Access the T menu and touch the upward left angle 4 times and the one going
straight left 4 times.
Touch the “view full design”icon on top right.
|
