|
SE ¼”seam
The manual states that Stitch E1 using the A foot with the right
edge of
the foot on the raw edge is a scant 1/4" seam.
If you think it isn't enough to the right, then touch the "needle
position
icon" on the lower left and touch the "+" to move
the needle further to the
right.
If you use the piecing foot, and use the straight stitch and place the raw
edge of the fabric even with the last red line on the right (aligns with the
right edge of the foot extension), that is 1/4" also but cannot be adjusted
with that foot because of the single hole.
|
