Tips & Techniques

Programmed buttonholes on 1+ with C foot

Touch the buttonhole of choice.

Touch the "function" button to bring up "prog".

Touch the Memory to bring up an empty memory or clear one to save the buttonhole in it.

Begin sewing the buttonhole and use the "reverse" button when it is the correct length and let it sew the bartack and the right side of the
buttonhole until it reaches the same length as the left column and then touch the "reverse" again so it will make the bartack and tie off.

Keep your foot on the pedal until it is completely done. Make sure this buttonhole is correct for the button size.

Then touch "repeat" and continue to make as many as you want. It will stay in that memory until you clear it or replace it with something else even if you turn the machine off.