|
Designer 1 Borders With 8-Way Stitches
Designer 1 programmed borders: Find a clear
memory for each one if you want to save these. Or you can touch "CLR" to
clear a memory.
**************************
Program #7 Large Scallop Border Menu H
Touch Prog Touch Menu H and touch H5.
Touch Adjust and change SL.2 and SW 12 and touch OK.
Touch the left pointing cursor arrow to move the cursor back under that
stitch and touch CLR. That puts the stitch in memory.
Touch CLR again and the scallop comes back on the screen. Move the
cursor to the right.
Touch Menu, Touch T menu.
Touch the straight up arrow 2 times.
Touch the top left diagonal arrow 3 times.
Touch the straight up arrow 1 time.
Touch CLR to bring that saved design out of memory and move the cursor
to the right.
Touch the straight up arrow 2 times.
Touch the left top diagonal arrow 3 times.
Touch the straight up arrow 1 time.
Touch CLR to bring that scallop up again and move the cursor to the
right.
Touch the straight down arrow 1 time.
Touch the lower left diagonal arrow 3 times.
Touch the straight down arrow 2 times.
Touch CLR to bring the scallop up again and move the cursor to the
right.
Touch the straight down arrow 1 time.
Touch the left lower diagonal 3 times.
Touch the straight down arrow 2 times.
Touch REP.
**************************
Program #8 Loopy Border Design
Touch Prog and touch Menu H and select H-10.
Touch the left pointing cursor and touch CLR.
Touch CLR again to retrieve the design and move the cursor to the
right.
Touch Menu and touch the T menu and touch the lower left diagional
arrow 3 times.
Touch CLR to retrieve the design and touch Adjust and touch the 2nd
mirror (horizontal).
Touch REP.
**************************
Program #9 V Scallop
Touch Prog and touch Menu H and select H-18.
Touch the left arrow to move the cursor back and touch CLR -
Touch CLR again to retrieve it and move the cursor to the right.
Touch the Menu and touch the T Menu.
Touch the upper left diagional arrow 3 times and touch CLR and move
the cursor to the right.
Touch the upper left diagional arrow 3 times and touch CLR and move
the cursor to the right.
Touch the lower left diagional arrow 3 times and touch CLR and move
the cursor to the right.
Touch the lower left diagonal arrow 3 times and touch REP.
**************************
Program #10 Fancy Large Scallop
Touch Prog and touch Menu H and choose #11.
Touch the left pointing arrow to move the cursor under the design and
touch CLR.
Touch CLR again to retrieve the design and move the cursor to the
right.
Touch Menu T and touch the upper left diagonal arrow 4 times and
touch the straight up arrow 2 times and touch CLR to retrieve
the design and move the cursor to the right.
Touch Menu T and touch the upper left diagonal arrow 4 times and
touch the straight up arrow 2 times and touch CLR to retrieve
the design and move the cursor to the right.
Touch the straight down arrow 2 times and touch the lower left diagonal
arrow 4 times and touch CLR and move the cursor to the right.
Touch the straight down arrow 2 times and touch the lower left diagonal
arrow 4 times and touch REP.
**************************
Program #11 Reverse Border Stitch
Touch PROG and touch N17, move the
cursor to the left and touch CLR and move the cursor
to the right.
Touch the T Menu and touch the straight up arrow 4 times and
touch CLR.
Touch Adjust and touch 2nd mirror (horizontal).
Touch straight down arrow 4 times and touch REP.
|
