Tips & Techniques

Deleting designs from the embroidery stick

If you have designs on your embroidery stick and you wish to remove them, you can use the “explorer”. Insert the embroidery stick in the computer. Right click on “start, explore” and then click on the drive that holds the embroidery stick. Mine says “Local disk L”. Yours may be different.

You should see the designs on the stick. Click on each one that you want to remove (hold the control button down to select more than one) and click on “file, delete” or right click in any highlighted area and click on “delete” or click on the “red X“.

You can also choose the “3D Organizer”, click on the drive to read the stick and do the same as above.

Now the design no longer shows on the embroidery stick, but it may have put it in the recycle folder on the stick. You cannot reach the “recycle folder” with the computer.

But, you can access it with your machine. Insert the stick in the machine and click on “file manager” and click on “devices” and choose the embroidery stick and “open”.

When you open it to see what is on the stick, you will see the “recycle folder”.

Click on the “recycle” folder and click on “open” and you will see everything in the recycle folder. Even though designs are in the “recycle folder”, you can still click on or several and click on “load” and they will appear on the Customizing screen.

If you click one of those designs or several, the background will turn yellow and you will see that the “delete” button lights up at the bottom of the screen.

It is the one that looks like sheets of paper with a red line. Touch that to “delete” the design permanently.

A screen will pop up for you to confirm your choice with the checkmark on the right.